Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 4 Next »



To edit an Anycast configuration, complete the following:

  1. From the Infoblox Portal, click Configure > Networking > Anycast.
  2. Select the Anycast Configuration to be edited or removed.
  3. Click on Edit located below the top Action bar.  Alternatively, clickand then select Edit to edit the Anycast Configuration.
  4. On the Anycast Config page, make the desired edits.
  5. Click Save & Close to save the updated configuration.

Warning: Anycast IP address and Service type(DNS/DHCP/DFP) cannot be modified if the Anycast config profile is associated with any Anycast Service. To modify it, remove the Anycast config profile from the Anycast service and make the change. After that reassign, the Anycast Profile to the Anycast Service.

  • No labels