Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Current »


Setting up Data Connector involves following a six-step process. 

Thw Data Connector Workflow
Diagram: The six-step workflow process for setting up the Data Connector.

  1. Deploy Infoblox server: The first step involves setting up the Infoblox server.
  2. Navigate to the Infoblox Portal and enable the Data Connector service: After the initial deployment, the user should navigate to the Infoblox Portal to enable the Data Connector service.
  3. Configure Data Connector Sources: This step involves specifying the data sources that the Data Connector will use.
  4. Configure Data Connector Destinations: In this step, the user defines where the Data Connector will send the processed data.
  5. Configure Data Connector ETL (Extract, Transform, Load) filters: This involves setting up filters for the ETL process, which will determine how the data is handled and manipulated during the process.
  6. Configure Data Connector Traffic Flows: The final step is to configure the pathways through which data will flow from the sources to the destinations.


  • No labels