Document toolboxDocument toolbox

Editing Data Profiles

Owned by Gary Leicht
Last updated: Sept 06, 2024
1 min read

To edit a data profiles, complete the following:

  1. From the Infoblox Portal, click Configure > Manage > TIDE Data.
  2. On the Data Upload page, click the Data Profiles tab, located above the Action bar.
  3. From the Profile column, select the name of the data profile. 
  4. Click the expand menu icon, select Edit Profile, and edit any of the following:
    • Description of the profile
    • Name of the feed
    • TTLs: disable any TTLs that are currently enabled, or enable any TTLs that are currently disabled
    • Status: If the profile is currently active, you can deactivate it by toggling the switch to the left. If the profile is currently inactive, you can activate it by toggling the switch to the right. 
  5. Click Save & Close to save the edits to the data profile configuration or click Cancel to cancel any changes to the data profile configuration.

For  information on submitting TIDE data, see TIDE Data Submission Overview.

For additional information, see the following: