/
Testing Network Configuration
Document toolboxDocument toolbox

Testing Network Configuration

Owned by Gary Leicht
Last updated: Oct 25, 2023

Before you forward your DNS traffic to BloxOne Cloud, it is important that your network and DNS server are set up correctly. You can execute a few dig and nslookup commands from your DNS server to ensure that you have properly configured the DNS server and clients for sending queries and receiving responses.

Note

Before configuring your network connection, make sure that your network is added to the Cloud Services Portal. If the network is not added,  you will get a REFUSED response for your dig queries.

The following are some sample commands:

dig @52.119.40.100 www.infoblox.com 
nslookup www.infoblox.com 52.119.40.100

If you experience resolution failures while executing the dig/nslookup commands, check your network configuration. The following are a few best practices that you may consider:

  • Check your firewall rules and make sure that they are properly set up for DNS traffic
  • Double check your routing configuration, especially if you use load-balancing connections
  • Validate your network configuration to ensure that it is set up for sending DNS queries and receiving responses
  • Ensure that you have enabled recursion on your DNS forwarders

After you have properly configured your DNS server and network, you can forward your DNS traffic to BloxOne Cloud, as described in Forwarding DNS Traffic to BloxOne Cloud.