Configuring Reporting Destination

After you set up your Data Connector virtual appliance, you must set up certain configurations so the Data Connector can gather relevant information from the Grid members, and then send the data to the reporting server.

To configure the Data Connector to send DNS data to a reporting server, complete the following:

1. Enable DNS service on the Grid Master. For information about enabling DNS service on the Grid Master, refer to the Infoblox NIOS Administrator Guide.
2. Configure and register the Data Connector in NIOS, as described in Registering and Viewing Data Connector in NIOS.
3. Configure the Grid to capture DNS queries and responses, as described in Configuring DNS Queries and Responses.