/
Accessing the Trinzic 100 Appliance
Document toolboxDocument toolbox

Accessing the Trinzic 100 Appliance

Owned by Jyothi KP
Last updated: Jul 22, 2022 by Gary Leicht


After completing the steps in Cabling the Appliance to a Network, you can make an SSHv2 connection and access the CLI through an SSHv2 client. You can also access the CLI by connecting a serial cable directly from the console port of a management system to the console port on the appliance, and using a terminal emulation program. The management system is the computer from which you configure and monitor the Infoblox appliance. You can access the appliance from the management system remotely across an Ethernet network or directly through a serial cable.
The management system must meet the following requirements to operate an Infoblox appliance.

Table 1 Software and Hardware Requirements for the Management System

Management System Software RequirementsManagement System Hardware Requirements

CLI ACCESS

  • Secure Socket Shell (SSH) client that supports SSHv2
  • Terminal emulation program, such as minicom or Hilgraeve Hyperterminal®.
  • Minimum System:
    500 MHz CPU with 256 MB RAM available to the Infoblox GUI, and 256 Kbps connectivity to an Infoblox appliance
  • Recommended System:
    1 GHz (or higher) CPU with 512 MB RAM available for the Infoblox GUI, and network connectivity to an Infoblox appliance
  • Monitor Resolution:
    Minimum: 1024 x 768
    Recommended: 1280 x 800 or better