wizard

The wizard command enables you to configure the Data Connector VM.

Syntax

> wizard

Example

> wizard


Do you want to configure admin network settings y/n [y]:
y
Please use: '?' for help on available command options.
Please enter IPv4 configuration in format: 'mode [gateway address mask vlanid]'
Current settings are [ static 10.36.0.1 10.36.130.1 255.255.0.0 0 ]:
static 10.36.0.1 10.36.130.1 255.255.0.0 0
ok
Please enter dns configuration[ 10.0.0.0 ]:
10.0.0.0
DNS servers obtained by DHCP (if any) have higher precedence
ok
Please enter domain configuration[ dc-xyz.com ]:
dc-xyz.com
ok
Please enter hostname configuration[ dc-xyz ]:
dc-xyz
ok
Configured System Setting:
gateway: 10.36.0.1
mask: 255.255.0.0
mode: static
address: 10.36.130.1
vlanid: 0
vlan configuration is only in effect in the static mode.
Configured DNS Setting:
Data Connector 2.0 Infoblox User Guide 127
Dns Server(s): ['10.0.0.0']
domain: dc-xyz.com
hostname: dc-xyz
Is it correct? y/n [y]:
y
Do you want to configure data output cloud registration settings y/n [y]:
y
Please use: '?' for help on available command options.
Please enter cloud url[ https://usa-va.csp.infoblox.com/dnslog ]:
Settings unchanged.
Please enter api_key[ 1234 ]:
Settings unchanged.
Please enter agent_id[ 8 ]:
Settings unchanged.
url: https://usa-va.csp.infoblox.com/dnslog
api_key: 1234
agent_id: 8
Is it correct? y/n [y]:
y
Do you want to configure data output cloud settings y/n [y]:
y
Please use: '?' for help on available command options.
Please enter Output cloud mode configuration[ hold ]:
hold
ok
The output mode is hold
Is it correct? y/n [y]:
y

Do you want to configure data output ArcSight settings y/n [y]:

y

Please use: '?' for help on available command options.

Please enter ArcSight SIEM address[ 10.196.105.197 ]:

Settings unchanged.

Please enter ArcSight default port[ 6514 ]:

Settings unchanged.

Please enter ArcSight mode[ forward ]:

Settings unchanged.

Address: 10.196.105.197

ArcSight port is 6514

The output mode is forward

Is it correct? y/n [y]:

Do you want to configure data output QRadar settings y/n [y]:

Please use: '?' for help on available command options.

Please enter QRadar SIEM address:

Settings unchanged.

Please enter QRadar default port[ 6514 ]:

Settings unchanged.

Please enter QRadar mode[ disabled ]:

Settings unchanged.

No address defined

QRadar port is 6514

The output mode is disabled

Is it correct? y/n [y]:
Do you want to configure data output splunk settings y/n [y]:
y
Please use: '?' for help on available command options.
Please enter splunk indexers[ 10.10.1.2 ]:
10.10.1.3
ok
Do you want to add more values? y/n [n]:
n
Please enter splunk index name[ xyz ]:
xyz
ok
Please enter splunk source type[ ib:dns:captures ]:
Settings unchanged.
Please enter splunk default indexer port[ 9997 ]:
Settings unchanged.
Please enter splunk mode[ disabled ]:
hold
CLI Commands
128 Infoblox User Guide Data Connector 2.0
ok
Indexers:
10.10.1.2
10.10.1.3
Index name is xyz
Source type is ib:dns:captures
Default indexer port is 9997
The output mode is hold
Is it correct? y/n [y]:
y
Do you want to configure admin system settings y/n [y]:
y
Please use: '?' for help on available command options.
Please enter Greeting banner text[ This is Infoblox Data Connection Virtual Machine ]:
This is Infoblox Data Connector VM.
ok
This is Infoblox Data Connector VM.
Is it correct? y/n [y]:
y
Do you want to configure data input scp settings y/n [y]:
y
Please use: '?' for help on available command options.
Please enter SCP users[ dc_scp_user ]:
dc_scp_user
Enter password for user dc_scp_user:
Enter again:
ok
Do you want to add more values? y/n [n]:
n
Registered user(s):
admin1
user123
dc_scp_user
Is it correct? y/n [y]:
y
Do you want to configure data input grid settings y/n [y]:
y
Please use: '?' for help on available command options.
Enter the IP address (or FQDN) of the NIOS Grid Master[ 10.35.5.49 ]:
Settings unchanged.
Enter the NIOS admin username[ admin ]:
Settings unchanged.
10.35.5.49
admin
Is it correct? y/n [y]: