/
Configuring DHCPv6 Properties
Document toolboxDocument toolbox

Configuring DHCPv6 Properties

Owned by Aliaksei Shautsou (Deactivated)
Dec 10, 2017

The following sections describe how to configure properties and options that apply to DHCPv6 objects only. You can configure and define the following DHCP properties:

Defining General IPv6 Properties

You can configure general DHCPv6 properties at the Grid level and override them at the member and lower levels.

  1. Grid: From the Data Management tab, select the DHCP tab, and then click Grid DHCP Properties from the Toolbar.
    Member: From the Data Management tab, select the DHCP tab -> Members tab -> Members -> member check box, and then click the Edit icon.
    Network: From the Data Management tab, select the DHCP tab -> Networks tab -> Networks -> network check box, and then click the Edit icon.
    Network Container: From the Data Management tab, select the IPAM tab -> network_container check box, and then click the Edit icon.
    Fixed Address: From the Data Management tab, select the DHCP tab -> Networks tab -> Networks -> network-> Fixed address check box, and then click the Edit icon.
  2. In the DHCP Properties editor, select the IPv6 DHCP Options tab, and complete the following:
    • Valid Lifetime: Specify the length of time addresses that are assigned to DHCP clients remain in the valid state. When this time expires, an address becomes invalid and can be assigned to another interface.
    • Preferred Lifetime: Specify the length of time that a valid address is preferred. A preferred address can be used with no restrictions. When this time expires, the address becomes deprecated.
    • Domain Name: Enter the name of the domain for which the Grid serves DHCP data.
    • DNS Servers: Click the Add icon. Grid Manager adds a row to the table. In the table, enter the IPv6 addresses of DNS recursive name servers to which the DHCP client can send name resolution requests. The DHCP server includes this information in the DNS Recursive Name Server option in Advertise, Rebind, Information-Request, and Reply messages.
  3. Save the configuration.