Managing Threat Protection Rules

You can modify any previously defined custom rules, or some of the parameters for system and auto rules. For most system and auto rules, you may change the Action and Log Severity. You can also enable or disable individual rules or an entire category of rules.
If you have selected to manually update threat protection rules, you must download updated rules from the Infoblox Support web site and then publish them to the system.
When a member is associated with a profile, it automatically uses the ruleset that is associated with the profile. When you delete the associated profile, member uses the ruleset that was previously associated with it.
You can do the following after the initial setup, including uploading the initial ruleset:

• Look at rules that are currently installed on your system, as described in Viewing Threat Protection Rules.
• Enable and disable certain rules, as described in Enabling and Disabling Rules.
• Upload rule updates to the system when you have selected to manually apply rule updates, as described in Modifying System and Auto Rules.
• Publish rule updates that you have uploaded to the system, as described in Publishing Rule Updates.
• Modify existing system rules, as described in Modifying System and Auto Rules.
• Modify custom rules, as described in Modifying Custom Rules.