Document toolboxDocument toolbox

About IPv6 Fixed Address Templates

A fixed address template is useful when you want to create multiple fixed addresses in a network. When you create a fixed address template, you specify the offset value and number of fixed addresses to be created. You can also specify additional properties for the fixed addresses.
Note that you can use the template to create address-based fixed addresses. You cannot specify prefixes in the template because a fixed address could use a prefix that is not part of the subnet to which the fixed address belongs. You can enter prefixes when you create the individual fixed address objects using the template.
If you have deployed the Cloud Network Automation license on the Grid Master, you can configure fixed address templates for cloud delegation. When you configure a template for cloud delegation, all fixed addresses you create using this template will inherit authority delegations from their parent objects. For information about Cloud Network Automation, see Deploying Cloud Network Automation.

Adding IPv6 Fixed Address Templates

To create an IPv6 fixed address template:

  1. From the Data Management tab, select the DHCP tab -> Templates tab.
  2. Click the Add drop-down menu and select IPv6 Fixed Address Template.
  3. In the Add IPv6 Fixed Address Template wizard, enter the following:
    • Name: Enter a name that helps identify the IPv6 fixed address template. For example, you can enter HP Printer when you create a template that contains settings for assigning fixed addresses or reservations to HP printers.
    • Comment: Optionally, enter additional information about the template.
    • Use for cloud delegation: When you select this check box, all fixed addresses you create using this template inherit authority delegation from their parent objects.

In the Optional Settings For Range of Objects section, do the following:

    • Offset: An offset in a fixed address template determines the IP address of the first fixed address created from the template. The appliance adds the offset value you enter here to the start IP address of the network in which you create objects using this template, and that IP address becomes the IP address of the object. For example, you specify an offset value of 50 for the 2001:db8:1263:/48 network, when you create a fixed address using the fixed address template, the appliance assigns it the address 2001:db8:1263:0:0:0:0:32.
    • Number of Addresses: Enter the number of IP addresses to be used as fixed addresses or roaming hosts.

Note: The appliance uses the offset and number of addresses only when this template is used in a network template.


4. Click Next to configure or override DHCP options as described in Configuring DHCP Properties.

5. Click Next to enter values for required extensible attributes or add optional extensible attributes. For information, see Using Extensible Attributes.

6. Save the configuration.

Modifying IPv6 Fixed Address Templates

To modify a fixed address template:

  1. From the Data Management tab, select the DHCP tab -> Templates tab -> template check box, and then click the Edit icon.
  2. The IPv6 Fixed Address Template editor contains the following tabs from which you can modify data:

     3. Optionally, you can click Toggle Advanced Mode to display the following tabs from which you can modify data:

Note that Grid Manager displays both the basic and advanced tabs the next time you log in to the GUI.

     4. Save the configuration.