At any time, you can check the overall system settings for the current NetMRI appliance. Click the Settings icon and choose the Settings Summary page (Settings –> Setup –> Settings Summary) to get a quick look at many basic aspects of the system–license limits and configuration, basic network configuration, settings for configuration data collection and other functional areas through which NetMRI does its work.

• The NetMRI Configuration panel shows the NetMRI version, model, serial number and license limit settings.
• The Network Configuration panel displays the NetMRI network domain settings as configured during step one of the installation process.
• The MGMT Interface Configuration panel displays the configuration settings for the NetMRI management interface.
• The Device and Interface Counts panel displays the current number of network devices and interfaces that NetMRI discovers up to the current time through its data collection across the network. Note the Total Interfaces and Up Interfaces counters, along with Frequently Polled   interfaces and any possible difference between Network Devices Seen and Managed Network Devices.
• The Collector Settings panel displays the status of each collector used for gathering information about the networks that NetMRI analyzes and monitors. Some collectors may be disabled if the required license is not installed. (Enable collectors at Settings –> Setup –> Collection and Groups.)
• The Module Settings panel displays the currently NetMRI software version. The possible versions are the following: Switch Port Manager, Automation Change Manager, and full NetMRI.
• The License Configuration panel identifies the current license information and provides a hyperlink to a page for updating your NetMRI license.

Many of these settings are defined through the Setup Wizard.