Validating and Accepting Configuration

After you save the VM configuration, you can view the information in the Review + Create panel. You are now ready to deploy the vNIOS for Azure virtual appliance that you have previously configured. If you need to change any configuration, you can return to Configure VM settings.

The Review + Create panel displays the details about your purchase (as illustrated in the Viewing VM Summary figure). Please peruse the information in this panel so you fully understand the price, the terms of use, and privacy policies of your deployment.
Click Create to begin the deployment of your Infoblox vNIOS for Azure appliance. This process might take up to 10 minutes to complete. If you have chosen to install temporary licenses, the process might take an additional five minutes. You can monitor the process in your Azure Dashboard.

Note

You will be purchasing the VM, storage, and IP address on an hourly basis, payable to Microsoft Azure through your Azure account. If you have not installed the Infoblox NIOS temporary licenses, you can purchase them through your Infoblox representatives or contact the Infoblox Technical Support.

When the virtual appliance is deployed successfully, you will receive an alert and the Azure portal displays the Resource group overview panel from which you can see an overview of the deployment in the Essentials section. You can now complete the following to set up your vNIOS for Azure virtual appliances:

Setting the virtual appliance as the primary DNS server, as described in Configuring vNIOS for Azure as the Primary DNS Server.
Locating network devices on VNets by performing a vDiscovery, as described in Performing vDiscovery on VNets.

Viewing VM Summary