Creating Exclusion Ranges

To create a DHCP exclusion range, complete the following:

1. From the Infoblox Portal, click Configure > Networking > IPAM/DHCP > Address Spaces.
2. Click IP Space > Address Block > Subnet > corresponding Range.
3. On the Range page, select Exclusion Range from the Create drop-down list.
4. On the Create Range page, under DHCP Exclusion Ranges, click Add and specify the following:
• Start Address: Enter the first IP address in the exclusion range.
• End Address: Enter the last IP address in the exclusion range.
• Comment: Enter a comment about the exclusion range.
5. Click Save & Close to save the created exclusion range.