To create an Anycast configuration, complete the following:
- From the Cloud Services Portal, click Manage > Anycast.
- Click on Create Anycast Configuration to open the Create Anycast Config page.
- In the Create Anycast Config dialog, complete the following:
- Name: Enter the name of the anycast configuration.
- Anycast IPv4 Address: Enter the Anycast IPv4 address. Up to two IPv4 IP addresses may be added when setting up anycast. Anycast supports the following IP addresses for BloxOne Threat Defense: 52.119.40.100 and 103.80.5.100. For BloxOne DDI, the administrator is required to specify the IP address as required.
- Anycast IPv6 Address: Enter the anycast IPv6 address.
- Description: Enter the description of the anycast configuration.
- Service: From the Select Service drop-down list, choose the service to be used with the anycast configuration.
- Expand the Tags section and add tags for this anycast configuration. For more information, see Managing Tags.
- Expand the Service Instances section, click Add and complete the following:
- NAME: Click Select List and choose a host from the drop-down list.
- Click Save & Close to save the updated configuration.