Content Comparison

...

1. Log in to the Infoblox Portal.
2. Click Configure -> Servers.
3. On the On-Prem Hosts page, select the on-prem host you want to configure.
4. Click the On-Prem Hosts drop-down menu, and then select Local Access to enable local access to the B1-212 appliance.
   

5. In the Enable Local Access dialog, click Enable. Local access to the appliance is granted for two hours. 

   Note
   title Note
   Enabling local access to the B1-212 appliance allows you to reset the on-prem host using the Device UI.

   
   

6. Log in to the Device UI. For information about the Device UI, see Troubleshooting Hosts.
   
7. Click Administration -> Reset Host from the left pane menu.
8. On the Administration page, click Reset for Factory Reset.
9. In the Confirm your action dialog, complete the following:
   • Enter your password: Enter the last seven or eight digits for of the serial number mentioned on the Service Tag of B1-212 appliance. 
10. Click Confirm to proceed with the factory reset.
11. Once the reset process is complete, you can set up and reconfigure the appliance, as described in Deploying the B1-212 Physical Server.

...