Document toolboxDocument toolbox

Logging

Owned by Sri Raghu
Last updated: Sept 06, 2024
1 min read

You can configure Universal DDI to log the DNS query request and response. Logging is enabled by default. 

To enable or disable logging, complete the following:

  1. From the Infoblox Portal, click Configure > Networking > DNS, and click Global DNS Configuration. 
  2. In the Global DNS Configuration page, click Logging.
  3. In the Logging section, select Enable query/response logging check box to enable logging. Clear the check box to disable logging. This check box is selected by default. 
  4. Click Save & Close to save.

Note

The DDI Query/Response Log and DDI DHCP Lease Log can be accessed using the Data Connector.