Document toolboxDocument toolbox

GCP - Destination

Owned by Sri Raghu
Last updated: Sept 25, 2024
1 min read

Configure the following in the Destination pane:

  • DNS Discovery: Toggle Enabled (green) or Disabled (red). By default, DNS discovery is disabled. When enabled, all the DNS objects are discovered. If you do not want the DNS objects to be discovered, disable DNS discovery. You can configure the fields on this dialog only if DNS discovery is enabled.

  • Sync Type - Choose Read Only or Read/Write.

  • Destination DNS View - Select the DNS view from the drop-down. The discovered objects will be copied to the selected DNS view.

  • Consolidate Public/Private Zone data into this DNS View - Toggle Enabled (green) or Disabled (red). If you enable this option, public and private zone data will be copied into this view.

  • Split View - Toggle Enabled (green) or Disabled (red). All GCP private hosted zones are placed into a DNS view that is automatically created by the Universal DDI platform during synchronization. For more information, see Enabling Split View.

  • Forward Only Zone: Toggle Enabled (green) or Disabled (red). This allows Zones to act as Forward Zones when configured on Universal DDI Service Instance as the Authoritative DNS Server.

  • IPAM Discovery: Toggle Enabled or Disabled. When enabled, IP address information will be synchronized with IPAM. When disabled, IP address information will not be synchronized with IPAM.

IPAM Discovery is disabled by default. If you create a discovery job and do not enable this setting, no IP address information will be synchronized with IPAM. When IPAM Discovery is disabled after it was previously enabled, existing IP address information from previously synced assets will remain but new assets will not be synced to IPAM.