Document toolboxDocument toolbox

Modifying a Cloud Forwarder

Owned by Sri Raghu
Last updated: Sept 13, 2024
1 min read

Complete the following steps to modify a previously configured cloud forwarder:

  1. Go to Configure > Networking > DNS > Cloud Forwarders.

  2. Choose the cloud forwarder and click Edit. Azure cloud forwarders cannot be edited.

  3. Edit the following as needed:

    • Name: Specify a name for the cloud forwarder.

    • Description: Provide a brief description.

    • VPC/VNET: Select the VPC/VNET from the drop-down. Azure and AWS only support a single VPC/VNET. GCP supports multiple VPC/VNETs. This field cannot be edited for AWS.

    • Subnet Address: Select the subnet and use the arrow icon (>>) to move it from Available to Selected. Azure only supports a single subnet and the subnet chosen must be used exclusively for the cloud forwarder. AWS supports multiple subnets. No subnet is chosen for GCP as GCP uses a standard network to source forwarded DNS traffic (35.199.192.0/19).

  4. Click Save & Close.