Modifying a Cloud VPN Destination

Do the following:

1. Select an existing cloud VPN destination, and click Edit.

2. In the Edit wizard, specify the following:

   • Description: Create a new description, or modify the existing one. The total length of the description may not exceed 256 characters.

   • IP Address: If necessary, modify the existing IP address.

   • Pre-shared key: If necessary, modify the value for the existing pre-shared key (PSK) for the connection. A PSK is the secret shared between two edges. If you have chosen Zscaler as the vendor, then, while configuring the IPSec VPN in the Zscaler Cloud Portal, you will need to enter the same PSK in the New Pre-Shared Key field of the Add VPN Credentials dialog. For more information, see Configuring IPSec VPN for Zscaler. 

   • CLOUD VPN ROUTERS:

     • Click for each available VPN router you would like to add to your cloud VPN destination. The router will move from the AVAILABLE side of the table to the SELECTED side.

     • Click to add all available VPN routers to your cloud VPN destination.

     • Click for each router you would like to remove from your cloud VPN destination.

3. Click Cancel to exit without saving, or click Save & Close.