The show status command shows the Grid and HA status. You can use this command to gather information about the current state of a Grid.

Syntax

show status

This command has no arguments.

Example

Status of Grid Master

Infoblox > show status
Grid Status: ID Grid Master
HA Status:Not Configured

Status of HA member

Infoblox > show status
Grid Status: ID Grid Member
HA Status: Active
Hostname: member1.infoblox.com
Grid Master IP: 10.35.113.15

Note: If the Grid member uses IPv6 communication protocol to join a dual mode Grid, then IPv6 address of the Grid Master is displayed.