The show ssl_tls_ciphers command shows the SSL/TLS ciphers that are enabled for the NIOS appliance. You can use the set ssl_tls_ciphers command to enable or disable the cipher suites. For information, see set ssl_tls_ciphers.

Syntax

show ssl_tls_ciphers

This command has no arguments.

Example

Infoblox > show ssl_tls_ciphers

1. TLS_DHE_RSA_WITH_AES_128_GCM_SHA256 enabled
2. TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 enabled
3. TLS_DHE_RSA_WITH_AES_128_CBC_SHA    enabled
4. TLS_DHE_RSA_WITH_AES_256_CBC_SHA    enabled
5. TLS_DHE_RSA_WITH_AES_128_CBC_SHA256 enabled
6. TLS_DHE_RSA_WITH_AES_256_CBC_SHA256 enabled
7. TLS_RSA_WITH_AES_128_GCM_SHA256     enabled
8. TLS_RSA_WITH_AES_128_CBC_SHA        enabled
9. TLS_RSA_WITH_AES_128_CBC_SHA256     enabled
10. TLS_RSA_WITH_3DES_EDE_CBC_SHA       enabled
11. TLS_RSA_WITH_AES_256_GCM_SHA384     enabled
12. TLS_RSA_WITH_AES_256_CBC_SHA        enabled
13. TLS_RSA_WITH_AES_256_CBC_SHA256     enabled
TLS_DHE_DSS_WITH_AES_256_CBC_SHA    disabled
TLS_DH_RSA_WITH_3DES_EDE_CBC_SHA    disabled
TLS_DH_DSS_WITH_3DES_EDE_CBC_SHA    disabled
TLS_DHE_DSS_WITH_AES_128_CBC_SHA    disabled
TLS_RSA_WITH_RC4_128_SHA            disabled
TLS_DHE_DSS_WITH_AES_256_GCM_SHA384 disabled
TLS_DHE_DSS_WITH_AES_256_CBC_SHA256 disabled
TLS_DHE_DSS_WITH_AES_128_GCM_SHA256 disabled
TLS_DHE_DSS_WITH_AES_128_CBC_SHA256 disabled