Document toolboxDocument toolbox

cac command

Owned by Viktoryia Varapayeva (Deactivated)
Last updated: Aug 25, 2022
1 min read

The cac command allows the configuration of the OCSP authentication service.

Syntax

The following is the command syntax:

cac [status|enable|disable|ocsp-enable|ocsp-disable]

The following table describes the subcommands of the cac command.

SubcommandDescription
statusPrints out the CAC status: Certificate authentication, OCSP, Configured CA.
enableEnables the certificate validity check.
disableDisables the certificate validity check.
ocsp-enableEnables the certificate revocation check.
ocsp-disableDisables the certificate revocation check.