Creating a Routed Network Profile

To create a routed network profile:

1. In vRealize Automation, click Infrastructure –> Reservations –> Network Profiles –> New –> Routed.
2. In the General tab, specify a name for the routed network profile.
3. In IPAM endpoint, select the Infoblox NIOS endpoint that you created previously.
4. In External network profile, select the Infoblox network profile that you created previously for allocating external IP addresses.
5. In Range subnet mask, specify the network mask for on-demand networks to create.
6. In the IP Blocks tab, selected the desired address space and click Add.
   A list of network containers available in NIOS is displayed. Note that address space in the vRA terminology corresponds to network view in NIOS and IP block corresponds to network container. You can search for specific network containers with the help of filters identical to those used for network ranges. For information, see Using Network Range Filters.
7. Select an IP block and click OK.
8. Click Apply, and then OK.