show ospf
- Panna .
The show ospf command displays configuration and statistical information about the OSPF protocol that is running on the NIOS appliance. For information on how to change your OSPF settings, see set ospf.
Syntax
show ospf {route | interface | database | neighbor | configuration}
The show ospf command displays information about the OSPF configuration on the appliance, reachability information about neighbors, and OSPF routes to destinations. You can specify the command with or without arguments.
| Argument | Description |
|---|---|
route | Displays the OSPF routing table, as determined by the most recent SPF calculation. |
interface | Displays the state and configuration on all interfaces configured with OSPF. |
database | Displays all OSPF database information. |
neighbor | Displays the OSPF neighbor information. |
configuration | Displays the running OSPF configuration file. |
Examples
Infoblox > show ospf interface eth0 is down OSPF not enabled on this interface
eth1 is up Internet Address 172.32.0.61/24, Broadcast 172.32.0.255, Area 0.0.0.0
 Router ID 172.32.0.61, Network Type BROADCAST, Cost: 100 Transmit Delay is 1 sec, State DROther, Priority 0 Designated Router (ID) 172.32.0.110, Interface Address 172.32.0.254
 No backup designated router on this network Timer intervals configured, Hello 10, Dead 40, Wait 3, Retransmit 5
  Hello due in 00:00:01 Neighbor Count is 1, Adjacent neighbor count is 1
lo is up Internet Address 172.16.10.10/32, Area 0.0.0.0 Router ID 172.32.0.61, Network Type LOOPBACK, Cost: 100
 Transmit Delay is 1 sec, State Loopback, Priority 0 No designated router on this network No backup designated router on this network Timer intervals configured, Hello 10, Dead 40, Wait 3, Retransmit 5
  Hello due in inactive Neighbor Count is 0, Adjacent neighbor count is 0 Infoblox > show ospf route ============ OSPF network routing table ============
N 172.16.10.10/32Â Â [100] area: 0.0.0.0
                  directly attached to lo
N 172.32.0.0/24Â Â Â Â [100] area: 0.0.0.0
                  directly attached to eth1
============ OSPF router routing table ============= ============ OSPF external routing table ===========