Use the show test_promote_master command to view the results of the test promotion of a Grid Master Candidate to Grid Master. You can run a test promotion by running the set test_promote_master command. 

Syntax

show test_promote_master <ip_address>

Examples

To see the results of the latest run:

Infoblox > show test_promote_master status
[Mon Sep 23 10:37:34 2019] - [10.39.166.9]: Test state is STARTED
a1.com              IRDP port (:2114): Message is sent from GMC [Mon Sep 23 10:37:34 2019]
                    VPN port (:1194): Message is sent from GMC  [Mon Sep 23 10:37:34 2019]
vm-09-75.com IRDP port (:2114): Connected                       [Mon Sep 23 10:37:35 2019]
                    VPN port (:1194): Connected                 [Mon Sep 23 10:37:35 2019]

To see the test results for a specific Grid Master Candidate:

 Infoblox > show test_promote_master 10.39.166.9
[Wed Sep 25 05:51:24 2019] - [10.35.191.9]: Test state is FINISHED
a1.com IRDP port (:2114): Message was not received by GMC [Wed Sep 25 05:51:20 2019]
             VPN port (:1194): Message was not received by GMC [Wed Sep 25 05:51:20 2019]
a3.com IRDP port (:2114): Message was not received by GMC [Wed Sep 25 05:51:20 2019]
             VPN port (:1194): Message was not received by GMC [Wed Sep 25 05:51:20 2019]
a2.com IRDP port (:2114): Message was not received by GMC [Wed Sep 25 05:51:20 2019]
             VPN port (:1194): Message was not received by GMC [Wed Sep 25 05:51:20 2019] 
a4.com IRDP port (:2114): Message was not received by GMC [Wed Sep 25 05:51:20 2019]
             VPN port (:1194): Message was not received by GMC [Wed Sep 25 05:51:20 2019]
vm-11-77.com IRDP port (:2114): Connected [Wed Sep 25 05:49:21 2019]
                         VPN port (:1194): Connected [Wed Sep 25 05:49:21 2019]