You can use the show connection_limit command to display the per client IP address maximum connection limit for the following protocols: HTTP and HTTPS. Note that maximum connections here refer to the network level connections, not application level connections. For example, an HTTPS connection limit of 4 means that there can be a maximum of four TCP connections between any given client IP address and the appliance that are concerned using the HTTPS protocol.
To set the maximum connection limit, see set connection_limit.

Syntax

show connection_limit {http | https}

Examples

Showing the Per Client Address Maximum Connection Limit for the HTTP Protocol

Infoblox > show connection_limit http
Current http connection limit: 150