Editing Access Authentication Service Settings

In the Access Authentication step, click Add and choose an available authentication profile from the drop-down list. Only enabled profiles can be associated with a NIOS-X server. Note that you can add multiple profiles only if they are of different protocol types.

For information about access authentication and how to configure it, see Managing Access Authentication.

The selected Name and Type of the authentication profiles are displayed in the table. You can also select a profile and click Remove to remove it.

Tagged Authentication Mode,: Choose one of the following mode for the chosen address block:  

• Disabled: The tagged authentication control is disabled. All clients must be authenticated. 

• Exclusions: Clients from the address scopes tagged for exclusion will bypass authentication. Other clients outside of the address scopes must be authenticated. 

• Inclusions: Clients from the address scopes tagged for inclusion must be authenticated. Other clients will bypass authentication.

• Both: Clients from the address scopes tagged for inclusion and clients from untagged address scopes must be authenticated. Clients from the scopes tagged for exclusion will bypass authentication. 

IP Space: Displays the IP address space you want to associate with the Access Authentication service and tagged authentication mode. For information about how to configure an IP space, see Configuring Authentication Modes.

Ensure that all required information is provided, and click Next to proceed to the next step. If any required information is left empty, an error icon will appear next to the page. To complete missing information, click Back. To exit without saving the configuration, click Cancel. If you have completed all edits and configuration, click Finish.