/
Downloading Endpoint

Downloading Endpoint

Before your roaming end users can connect to Infoblox Threat Defense, you must download and install Endpoint on their local devices. The client enforces security policies on your end users’ devices, regardless of where they are and which networks they are connected to.

Infoblox Endpoint is not supported for Azure and AWS VMs. Azure and AWS VMs are not allowing to add loopback address as DNS address. If Infoblox Endpoint is added to a DNS address as a loopback address, then Azure and AWS VMs will attempt to try revert to its original DNS Address. This will result in a network connectivity issue.

Port Usage

The following table lists the port usage for Infoblox Endpoint:

Infoblox Portal

csp.infoblox.com
threatdefense.infoblox.com and its subdomains

TCP

443

Infoblox Platform DNS Server (HTTPS/DNS)

  • 52.119.40.100

  • 52.119.41.100

  • 103.80.5.100

  • 103.80.6.100

TCP/UDP

443 and 53

Anycast

  • 52.119.40.100

  • 52.119.41.100

  • 103.80.5.100

  • 103.80.6.100

threatdefense.infoblox.com and its subdomains

TCP

443

 

To download the Endpoint ZIP archive and make it accessible to your end users, complete the following:

  1. From the Infoblox Portal, click ConfigureAdministration > Downloads.

  2. On the Downloads page, select the installer type and click the respective link to download the Endpoint ZIP archive for each platform your business requires.

  3. After you download the ZIP files, upload them to a web page or server that your end users can access.

  4. You can now install the Endpoint application on your users’ devices or send out an email message containing the instructions and location of the download page so your roaming end users can download Endpoint on their local devices.

Image: The Infoblox Endpoint download options located under the Administration menu in the Infoblox Portal. 

Endpoint supports the following platforms:

Linux

  • Ubuntu 22.x

  • Ubuntu 20.x

  • Red Hat 8.x

Only Infoblox Endpoint for Ubuntu 22 is supported on EU realm.

Apple

Advisory for macOS Sequoia 15

Compatibility issues have been identified when running Infoblox Endpoint on macOS Sequoia 15.0. Apple has resolved these issues in macOS Sequoia versions 15.0.1 and later.

Customers planning to upgrade their macOS to version 15 should follow these steps:

  • Upgrade a few computers initially rather than upgrading all machines at once, monitor for any issues, and only proceed with upgrading your remaining devices if no problems are detected.

  • macOS Sequoia 15.0.1 and above

  • macOS Sonoma

  • macOS Ventura

  • macOS Monterey

  • macOS Big Sur

Microsoft

  • Windows 11

  • Windows 10

Endpoint automatically upgrades itself based on new versions that are available on the Infoblox Portal. Your systems and end user devices will always get the latest version of Endpoint automatically. For more information about upgrades for Endpoint, see Upgrading Endpoint.