/
Adding Internal Domains to an Endpoint Group
Document toolboxDocument toolbox

Adding Internal Domains to an Endpoint Group

Owned by Gary Leicht
Last updated: Sept 06, 2024

Adding an Internal Domains List to an Endpoint Group

Note

By default, when a new endpoint group is created, the default internal domains list is already associated with it. A maximum of 3000 internal domains can be synced or associated with an endpoint group.

To add an Internal Domains List to DNS Forwarding Proxy, complete the following:

  1. From the Infoblox Portal, click Configure > Security > Endpoints.
  2. On the Endpoints Groups page, select the endpoint group to have an internal domain list added to it.
  3. Click the Edit button located below the top Action bar to open the Edit Endpoint Group page.
  4. In the Internal Domains List section of the page, click Add to add an available internal domain list to the endpoint group.
  5. To add multiple internal domain lists to an Endpoint Group, repeat Step 3 and Step 4 for each additional internal domain list until all internal domain lists have been added.  
  6. Click Save & Close to save your configuration.

Removing Internal Domains Lists from an Endpoint Group

To remove an Internal Domains List from DNS Forwarding Proxy, complete the following:

  1. From the Infoblox Portal, click Configure > Secuirty > Endpoints.
  2. On the Endpoints Groups page, select the endpoint group you want to remove the internal domain list from.
  3. Click the Edit button located below the top Action bar to open the Edit Endpoint Group page.
  4. In the Internal Domains List section, select the internal domain list you want to remove.
  5. Click Remove to remove the domain list from the endpoint group.
  6. Click Save & Close to save your configuration.

For information on internal domains, see Configuring Internal Domains.