Viewing and Modifying Data Connector Configuration

To view and modify host configuration, complete the following:

From the Cloud Services Portal, click Manage -> On-Prem Hosts.
Select the on-prem host for which you want to modify, right-click the Action icon, and then click Edit. You can also select the host check box and then click Edit at the top of the page.
On the edit page, you can review and modify the following information:

Note

When you add or modify any of the following settings, services on your on-prem host will restart after you save the configuration. You might experience a minor outage when the services restart. In addition, if the new configuration is invalid, BloxOne Threat Defense will revert back to the previous configuration after a few minutes. For example, if you made a typo while changing the IP address of an interface, the IP address becomes invalid and BloxOne Threat Defense reverts to the previous IP address to ensure that the on-prem host is still operational. This validation process happens in the background and does not affect any operations on your on-prem host.

- Tags: You can expand this section, and then view and update the tags for the Data Connector.
- Applications & Services: You can view the licenses and services that are applicable to the Data Connector.
  - LICENSES: This section lists the licenses and the license tiers for the Data Connector. You cannot modify this.
  - SERVICES: This section lists the services associated with the Data Connector. You can use the service slider to enable or disable CDC. Note that you cannot run other services on a Data Connector.
When you enable CDC service on an on-prem host, you use the host solely as the Data Connector. You cannot run other services on the Data Connector. Therefore, you will not be able to configure the following sections:
- IP Interface Settings
- DNS Local Resolver IP Settings
- NTP Settings
- Proxy Settings
- Docker Bridge Settings
Click Save & Close.