admin.network > wizard

The admin.network > wizard command enables you to configure the network settings.

Syntax

admin.network > wizard

Example

admin.network > wizard


Do you want to configure admin network settings y/n [y]:
y
Please use: '?' for help on available command options.
Please enter IPv4 configuration in format: 'mode [gateway address mask vlanid]'
Current settings are [ dynamic ]:
static 10.36.0.1 10.36.130.12 255.255.0.0 3625
ok
Please enter dns configuration:
10.0.0.0
DNS servers obtained by DHCP (if any) have higher precedence
ok
Please enter domain configuration[ infoblox.com ]:
ok
Please enter hostname configuration[ dc-infoblox ]:
ok
Configured System Setting:
gateway: 10.36.0.1
mask: 255.255.0.0
mode: static
address: 10.36.130.12
vlanid: 3625
vlan configuration is only in effect in the static mode.

Network configuration in progress...
Configured DNS Setting:
Dns Server(s): ['10.0.0.0']
domain: infoblox.com
hostname: dc-infoblox
Is it correct? y/n [y]:
Updating network interface configuration is in progress (It may take few seconds)...