data > wizard
The data > wizard
command configures the cloud destination, SCP users, and reporting output for Data Connector.
Syntax
data > wizard
Example
data > wizard
Do you want to configure data output cloud registration settings y/n [y]:
y
Please use: '?' for help on available command options.
Please enter cloud url[ https://usa-va.csp.infoblox.com/dnslog ]:
Settings unchanged.
correct? y/n [y]:
y
Do you want to configure data output cloud settings y/n [y]:
y
Please use: '?' for help on available command options.
Please enter Output cloud mode configuration[ hold ]:
Settings unchanged.
The output mode is hold
Is it correct? y/n [y]:
Do you want to configure data output ArcSight settings y/n [y]:
y
Please use: '?' for help on available command options.
Please enter ArcSight SIEM address[ 10.196.105.197 ]:
Settings unchanged.
Please enter ArcSight default port[ 6514 ]:
Settings unchanged.
Please enter ArcSight mode[ forward ]:
Settings unchanged.
Address: 10.196.105.197
ArcSight port is 6514
The output mode is forward
Is it correct? y/n [y]:
Do you want to configure data output QRadar settings y/n [y]:
Please use: '?' for help on available command options.
Please enter QRadar SIEM address:
Settings unchanged.
Please enter QRadar default port[ 6514 ]:
Settings unchanged.
Please enter QRadar mode[ disabled ]:
Settings unchanged.
No address defined
QRadar port is 6514
The output mode is disabled
Is it correct? y/n [y]:
Do you want to configure data output splunk settings y/n [y]:
y
Please use: '?' for help on available command options.
Please enter splunk indexers[ 10.10.1.2, 10.10.1.3 ]:
Settings unchanged.
Please enter splunk index name[ xyz ]:
Settings unchanged.
Please enter splunk source type[ ib:dns:captures ]:
Settings unchanged.
Please enter splunk default indexer port[ 9997 ]:
Settings unchanged.
Please enter splunk mode[ hold ]:
Settings unchanged.
Indexers:
10.10.1.2
10.10.1.3
Index name is xyz
Source type is ib:dns:captures
Default indexer port is 9997
The output mode is hold
Is it correct? y/n [y]:
y
Do you want to configure data output reporting settings y/n [y]:
y
Please use: '?' for help on available command options.
Please enter reporting mode[ hold ]:
Settings unchanged.
The output mode is hold
Is it correct? y/n [y]:
[y]:
y
Do you want to configure data input grid settings y/n [y]:
y
Please use: '?' for help on available command options.
Enter the IP address (or FQDN) of the NIOS Grid Master[ 10.35.5.49 ]:
Settings unchanged.
Enter the NIOS admin username[ admin ]:
Settings unchanged.
10.35.5.49
admin
Is it correct? y/n [y]:
y
Setup wizard finished successfully