/
show distributed_grid_comm_mode
show distributed_grid_comm_mode
- Naveen J Oommen
Owned by Naveen J Oommen
Jan 07, 2025
1 min read
Loading data...
Use the show distributed_grid_comm_mode CLI command to display if NIOS Grid is in the FIPS/CC compliant mode or not.
Syntax
show distributed_grid_comm_mode
This command has no arguments.
Examples
The following output is displayed when the GRID is in compliant state:
Infoblox > show distributed_grid_comm_mode
The distributed grid communication is operating in compliant mode.
The following output is displayed when the GRID is in non-compliant state:
Infoblox > show distributed_grid_comm_mode
The distributed grid communication is operating outside of compliant mode.