Document toolboxDocument toolbox

show ipv6_bgp

The show ipv6_bgp command displays the local NIOS appliance's IPv6 BGP configuration, reachability information about neighbors, and BGP routes to destinations. You can specify the command with or without an argument. A command without an argument defaults to show bgp route.
For information about how to write statistical information to syslog, see set bgp log.

Syntax

show ipv6_bgp {route | neighbor | summary | config}

Argument Description
routeDisplays the BGP routing table.
summaryDisplays the BGP protocol summary.
neighborDisplays information about all known BGP neighbors. If only IPv4 BGP information is available, this command option displays IPv4 information.
configDisplays the running BGP configuration file, including all IPv4 and IPv6 configuration, prefix lists and access-lists.

If no applicable information is available (for example, the current device has no IPv6 BGP configuration and hence no IPv6 BGP neighbor information), you are returned to the NIOS CLI prompt.

Example

Infoblox > show ipv6_bgp summary
BGP router identifier 10.34.1.179, local AS number 1 RIB entries 3, using 288 bytes of memory
Peers 1, using 4560 bytes of memory

Neighbor    V   AS  MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
10.34.1.178 4   10  192542  240631      0    0    0 02:45:16      0


Total number of neighbors 1
Infoblox > show ipv6_bgp neighbor

BGP neighbor is 2001:1938:BA8::22AA:1, remote AS 10, local AS 1, external link
 BGP version 4, remote router ID 10.36.1.66
 BGP state = Established, up for 02:11:21

  Last read 14:34:06, hold time is 16, keepalive interval is 4 seconds
  Neighbor capabilities:

   4 Byte AS: advertised and received
   Route refresh: advertised and received(old & new)
   Address family IPv4 Unicast: advertised and received
   Address family IPv6 Unicast: advertised and received
 Message statistics: Inq depth is 0 Outq depth is 0

Inq depth is 0
Outq depth is 0

                                   Sent    Rcvd
Opens:                             118     25

Notifications:                     13      88
Updates:                           219     0
Keepalives:                        239773  192022
Route Refresh:                     0       0
Capability:                        0       0
Total:                             240123  192135


Enter <return> for next page or q<return> to go back to command line.
Minimum time between advertisement runs is 30 seconds


 For address family: IPv4 Unicast
  NEXT_HOP is always this router

  Community attribute sent to this neighbor(both)
  Inbound path policy configured

  Outbound path policy configured
  Incoming update prefix filter list is *DEFAULT
  Outgoing update prefix filter list is *ANYCAST

  0 accepted prefixes

For address family: IPv6 Unicast
  Community attribute sent to this neighbor(both)
  0 accepted prefixes

  Connections established 73; dropped 72
  Last reset 02:13:50, due to BGP Notification send

Local host: 10.34.1.179, Local port: 179
Foreign host: 10.34.1.178, Foreign port: 43135
Nexthop: 10.34.1.179

Nexthop global: 2001:db8:a22:1b0::3
Nexthop local: fe80::230:48ff:febc:9503
BGP connection: non shared network

Read thread: on Write thread: off