/
show status
Document toolboxDocument toolbox

show status

Owned by Panna .
Last updated: Sept 22, 2022

The show status command shows the Grid and HA status. For a Grid member, the command also shows the host name and the Grid Master IP address. You can use this command to gather information about the current state of a Grid.

Syntax

show status

This command has no arguments.

Examples

Status of Grid Master

Infoblox > show status
Grid Status: ID Grid Master
HA Status: Not Configured

Status of Grid Member

Infoblox > show status
Grid Status: ID Grid Member
HA Status: Not Configured
Hostname: member1.infoblox.local 
Grid Master IP: 10.64.40.31

Status of HA member

Infoblox > show status
Grid Status: ID Grid Member
HA Status: Active
Hostname: member1.infoblox.com
Grid Master IP: 10.35.113.15

Note:

  • If the Grid member uses IPv6 communication protocol to join a dual mode Grid, then IPv6 address of the Grid Master is displayed.
  • If a Grid Master has a Management Interface set up, then the show status output of its Grid Member shows the Management interface IP address as the Grid Master IP address.