The set lom command configures the LOM (Lights Out Management) settings for the IPMI interface. To view the current network settings for the IPMI interface, use the show lom command.

Syntax

set lom

This command has no arguments.

Example

Infoblox > set lom
Enter LOM IP address: 10.1.1.22
Enter LOM netmask: 255.255.255.0
Enter gateway address [Default: 10.34.10.1]:
LOM network settings:


IP address: 10.34.10.42
Netmask:255.255.255.0
Gateway address: 10.34.10.1


Is this correct? (y or n): y
Are you sure? (y or n): y