/
set hairpin_mode
Document toolboxDocument toolbox

set hairpin_mode

Owned by Shwetha S (Deactivated)
Jun 14, 2024
1 min read

The set hairpin_mode CLI command allows you to enable or disable the hairpin_mode for DNS Cache Acceleration service.

The set hairpin_mode CLI is used to replicate the behavior of the IB-4030 on the virtual DNS Cache Acceleration platforms. After setting theset hairpin_mode CLI command, cached responses in virtual DNS Cache Acceleration go out from the same interface the query arrived on and non-cached responses sent by BIND goes out of the interface using the routing tables configured in NIOS.

Note

  • You can execute the set hairpin_mode CLI command only if the DNS Cache Acceleration service is enabled in NIOS.

  • During a system reboot, ensure to wait until the DNS Cache Acceleration service returns to running state before executing the set hairpin_mode CLI command.

Syntax

set hairpin_mode <on|off>

Argument

Description

Argument

Description

on

Enables the hairpin_mode.

off

Disables the hairpin_mode.

Example

Infoblox >
Infoblox > set hairpin_mode on
Enabled Hairpin mode.