You can use the set sysName command to set the FQDN (fully qualified domain name) of the appliance to allow configured SNMP management system to query the sysName value. If the appliance is an HA pair, you can use the name2 command to set the FQDN of node 2 of the HA pair.

Syntax

set sysName name1 [name2]

Examples

Setting the FQDN of the appliance

Enter the following on the appliance:

Infoblox > set sysName eng.corp100.com

Setting the FQDNs of an HA Pair

Enter the following on the appliance:

Infoblox > set sysName active.corp100.com passive.corp100.com