The set mgm attached command forces a Grid to attach to a Master Grid. Use this command only if a Grid is in the Attached state on the Multi-Grid Manager and Detached on the Grid Manager. This command recovers the Grid status when it is out of sync with the Grid status on the Multi-Grid Manager.

Syntax

set mgm attached [MGM IP Address] [Port Number]

Argument	Description
`MGM IP Address`	IP address of the Master Grid
`Port Number`	Port number of the Master Grid

Example

The following example uses the set mgm attached command.

Console connect [@ Grid IP address] Infoblox > set maintenancemode Maintenance Mode > set mgm attached [MGM IP address] [Port Number] This command will force the Grid to get attached. Are you sure you want to continue? (y or n): y