set default_route
- Panna .
Owned by Panna .
Jun 20, 2022
1 min read
Loading data...
The set default_route command allows you to configure the default gateway for the NIOS appliance. You can set the gateway address of LAN1 or LAN2 as the default route. You can also specify the IPv4 or IPv6 gateway address. You can also set an optional VLAN gateway address and make it the default route.
Syntax
set default_route LAN1|LAN2
set default_route IPv4gateway [IPv6gateway] | IPv6gateway [IPv4gateway]
| Argument | Description |
|---|---|
LAN1 LAN2 | Specifies the LAN1 gateway address. Specifies the LAN2 gateway address. |
IPv4gateway | Specifies the IPv4 gateway address. Specifies the IPv6 gateway address. |
Example
Infoblox > set default_route LAN1
Infoblox >set default_route LAN2 Infoblox > set default_route 10.35.0.1 2620:10a:6000:2400::1
Infoblox > set default_route 2620:10a:6000:2400::1